TEG-S224TX
26-Port 10/100/1000Mbps NWay Copper Gigabit Ethernet Switch

Add to Cart

ZOOM IN
TRENDnet's TEG-S224TX is a 26-port 10/100/1000Mbps NWay Gigabit Switch with 24 10/100Mbps NWay Ethernet ports and two 1000Base-T Copper Gigabit Ethernet ports. All ports supports full and half duplex transfer mode with non-blocking store-and-forward switching method. This high-performance switch also supports IEEE 802.1p Quality of Service (QoS) for priority data packet processing. And with Broadcast Storm Control, Port Trunking, and VLAN supports, the TEG-S224TX is powerful and easy-to-use in reducing unnecessary broadcast traffic, segmenting the network, and enhancing network security.



 

Features
2 10/100/1000Mbps Auto-Negotiation Copper Gigabit Ethernet Ports
24 10/100Mbps Auto-Negotiation Ethernet/Fast Ethernet Ports
Full/half Duplex transfer mode for each 10/100/1000Mbps ports
Auto MDI-II / MDI-X media type detection for all ports
Supports store and forward architecture with non-blocking full wire speed performance
802.3x flow control for full duplex and collision-based back pressure function for full duplex operation
Supports up to 32K MAC addresses table/hashing algorithm on address learning
Supports 2Mbytes packet buffer per device
Broadcast storm control
Port Trunking (2 Trunk Groups) with 2, 3, 4, 5, 6, 7, or 8 designated 10/100Mbps ports
Port-based VLAN
Supports IEEE 802.1p Port-Based Quality of Service (QoS)
Console Port (cable included) for easy configuration with Windows-Based GUI (for Win95/98/ME)
Extensive front-panel diagnostic LED's
5 Year Warranty

 

Specifications
Standards: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX Fast Ethernet, IEEE 802.3ab 1000Base-T Gigabit Ethernet, IEEE 802.3z 1000Base-F Gigabit Ethernet, ANSI/IEEE 802.3 NWay Auto-Negotiation, IEEE 802.3x Full-Duplex Flow Control
Data Transfer Rate:
Ethernet:
 
10Mbps (Half-Duplex),
20Mbps (Full-Duplex)
 
Fast Ethernet:
100Mbps (Half-Duplex),
200Mbps (Full-Duplex)
 
Gigabit Ethernet:
1000Mbps (Half-Duplex),
2000Mbps (Full-Duplex)
 
Cabling:
Ethernet:
 
UTP CAT 3,4,5, EIA.ITA-568 100-ohm screened twisted pair (STP)
Fast Ethernet:
UTP CAT 5, EIA/TIA-568 100-ohm screened twisted pair (STP)
 
Gigabit Ethernet:
UTP CAT 5, EIA/TIA-568 100-ohm screened twisted pair (STP)
Protocol: CSMA/CD
Topology: Star
Data RAM Buffers: 2Mbit per Device
Filtering Address Table: 32K entries per device
Diagnostic LEDs: Power, 10M Link/Act, 100M Link/Act, 1000M Link/Act
Power Consumption: 100~240 VAC 50/60hz, Internal Universal Power Supply
Dimensions: 440 x 200 x 44mm (W x H x D)
Operating Temp.: 0 to 50C (32 to 122 F)
Storage Temp.: -5 to 55 C (23 to 131 F)
Humidity: 5 % to 90 % non-condensing
Certifications: FCC Class A, CE Class A, VCCI-A
 

 

Benefits
Performance: Provides two 1000Mbps Gigabit connections to Power Servers and/or other Gigabit Switch, with each port running at full wire speed.
Flexibility: Connects to 10Base-T, 100Base-TX, and
1000Base-T Networks.
Expendability: Simple expansion can be done by uplinking to other 10/100Mbps or Gigabit Switches. Trunks two switches with up to 8 10/100Mbps ports to create 1.6Gbps "pipe" between two Switches.
Cost Effectiveness: Provides Gigabit Performance at an affordable price.
Security: Port-based VLAN to further segment the network.